Accident Involving Hydraulic Piling Machine
Photo 1: Hydraulic Piling Machine at accident scene | |||||||||||||||||
An accident took place on 20th May 2008 at around 8:00pm when piling work was being carried out. The accident occurred AT a construction site which is situated next to the public parking area. The Hydraulic Pile Jacking Machine (model YZY 240) was equipped with a crane and a hydraulic piling press. Investigation revealed that the machine is located about 2 meters from the site hoarding which is adjacent to the public parking area. During the accident, one of the concrete piles which weigh about 2.8 tonnes with the dimensions of 12 meters (Length) x 300 mm (Width) X 300mm (Thickness) fell and crushed two vehicles in the parking area. The accident happened due to the failure of the lifting lug and sling which were used to tie the concrete pile.
|
|||||||||||||||||
Recommendations:
|
|||||||||||||||||
|
|||||||||||||||||
References:
|
|||||||||||||||||